The Built Environment, what we can offer:

Written by

Envirochem provide a variety of analytical tests for health hazards that may be present within residential and commercial properties.

Our most common tests include:

+ Anthrax in plaster

+ Lead in paint

+ Arsenic in paint and wallpaper

+ Unknown material identification

Envirochem are always working to ensure the safety and wellbeing of people, and to preserve the environment for generations to come.

For more information please call on 01329 287 777 or fill out the form below;

Contact Envirochem now
Sending

Analysis for the Built Environment

Written by

What is analysis in the Built Environment:

We offer a variety of analyses for the Built Environment where sensitivity is required in understanding the composition and nature of various substances.

For example, lead, arsenic and other metals in paint, anthrax or gypsum in plaster, mould and more.

Why test:

Many substances in the built environment can cause serious harm if they are disturbed and you are exposed to them. For example:

Lead in paint if breathed in or ingested can lead to changes in your blood and have effects on your nervous system and kidneys.

Anthrax is a potentially fatal infection caused by Bacillus anthracis that is transmitted from animals to humans. In the built environment one of the main sources of anthrax risk is horsehair plaster, typically found in older buildings, and usually pre-dates the 1950’s.

Paint and wallpaper containing arsenic that becomes damp, can be metabolised to a volatile form of arsenic called arsene. This arsene can then be inhaled by the occupants of the building. Even if concentrations are low, prolonged exposure can lead to arsenic bio-accumulating in the body and subsequent sickness. 

Chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), and other similar gases in insulating foams are ozone layer depleting substances, which is one of the driving causes of climate change. Many of these substances are banned or are being phased out under the Montreal Protocol because of how damaging they are to the ozone layer.

Who should test:

Depending on what you are testing for, below is a few examples of who might require testing:

  • Demolition workers
  • Building contractors
  • Anyone carrying out refurbishment works
  • Individuals doing DIY
  • Anyone concerned about mould growth
  • Insulators or Insulation removers

What we can offer:

Envirochem can offer a range of testing including:

  • UKAS accredited Lead and Chromium in paint testing
  • Arsenic in paint and wallpaper testing
  • Anthrax or gypsum in plaster
  • Chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs) in foam and polystyrene
  • Mould analysis
  • Tests for over 30 metals in paint

We can also attend site and sample for you or alternatively we offer self-sampling kits for you to sample yourself to send to us for analysis.

For more information call us on 01329 287 777 or fill out the form below:

Contact Envirochem now
Sending

Where is Lead found?

Written by

Why is Lead in paint?

Lead was used in paint to help speed up the drying process but also for visual properties. It also increased the durability of paint once applied.

 

Why test for Lead in paint?

 

The body can absorb lead that is breathed in, such as in the form of dust or fumes and if you swallow anything containing lead.

Exposure can lead to changes in your blood which may cause anaemia and it can have effects on your nervous system and kidneys.

 

Who should test?

Those at the highest risk of exposure are those that carry out industrial processes such as blast/burning removal of lead paint, lead smelting and many more that create lead dust, vapour or fumes.

However, even individuals or contractors stripping lead paint from windows, doors and frames from homes and workplaces can lead to exposure.

 

What we can offer:

Envirochem can offer UKAS accredited Lead in paint analysis and we can attend site and sample for you or alternatively we offer self-sampling kits for you to sample yourself to send to us for analysis.

 

For more information please contact us on 01329 287 777 or fill out the form below:

 

Contact Envirochem now
Sending

 

 

 

Asbestos Testing Kits

Written by

 

Everyone knows that the presence of asbestos is definitely something you don’t want lurking around your home or workplace. With our asbestos self-test kits it’s never been easier to take a sample of an area you think may have asbestos and get it tested by us so you can get on with your day-to-day life.

Our self-sampling kit will enable you to take a sample, safely, from a material you suspect contains asbestos. The substance can be found in a number of materials, and it is commonplace in buildings built prior to 2000. It can be found in anything from corrugated cement and internal cladding panels to window sills, walls and boards. It is always safest to check whether asbestos is present before making any changes to a building.

If you’re considering renovating your home or workspace, make sure you order one of our self-test kits today to ensure the process is as safe as possible. Alternatively, our expert team is always on hand to attend a site and take samples for you. For more information, get in touch with one of our experts today.

We always want your safety to be a priority and to make sure the process of checking for harmful substances is as straight forward as possible. Whether it’s at work or in your home, we understand that it’s not always easy to know where to start if you’re worried about asbestos. Our self-test kits are easy to use, come with all the necessary protective equipment and instructions and can be returned back to us for analysis. If needed, we can let you know feedback and results in just four hours!

We also have a wide variety of self-test kits for a range of different substances along with our Asbestos testing kit, we also offer  Lead in Paint testing kits, Legionella testing kits and more.

Order any of our full range of self-test kits here:

 

For more information or to get in touch with one of our team please fill out the form below or email us at office@envirochem.co.uk.

Contact Envirochem now
Sending

Lead in Paint

Written by

It’s not just walls that could contain Lead in paint– it is most likely found on railings, doors and window frames. Test the paint in your home with our self-test kits or have one of our team come out to your site and do the sampling for you. The samples will then be analysis by our in-house UKAS accredited lab.

 

For more information call us on 01329 287 777 or fill out the form below;

 

Contact Envirochem now
Sending

 

 

We’re Expanding Our Occupational Hygiene Department!

Written by

Here at Envirochem, we’re expanding our Occupational Hygiene Department and are pleased to welcome our new Head of Department Sam, along with a new Van to add to the fleet.

Within the department we can offer a wide range of sampling/analysis and consultation, including but not limited to:

  • Noise and Vibration Surveys – With our wide range of instrumentation we can gather analytical data concerning the impact of noise and vibration for demolition sites.

 

  • UKAS accredited sampling & analysis of total inhalable & respirable dusts – We are happy to undertake site visits, sampling and analysis, to meet the needs of our clients.

 

  • Local exhaust ventilation (LEV) testing – (LEV) checks help control the release of hazardous airborne substances from a process into the workplace environment.

 

  • Volatile organic compounds (VOCs) testing – The main aim of VOC analysis is to identify the types of VOCs present and their concentrations in work place environment.

 

  • Emissions testing for stack monitoring to technical guidance notes M1 and M2.

 

  • Air quality surveys.

 

For more information or to contact us please fill out the form below or call on 01329 287 777;

 

Contact Envirochem now
Sending

Covid-19 Safety Measures – Open for Business As Usual.

Written by

Here at Envirochem, we are taking all the necessary steps to ensure your safety as well as ours when samples are dropped off to us. We are wearing face coverings, regularly testing staff and hand sanitising to name a few. We remain open and operational for all our services.

 

For more information about our services please call on 01329 287 777 or fill out the form below;

 

Contact Envirochem now
Sending

Chemical Analysis

Written by

From soil contamination to lead in paint testing, our chemical department can offer analysis and consultation on a wide range of issues in the built environment.

 

For more information call us on 01329 287 777 or fill out the form below;

 

Contact Envirochem now
Sending

Test your home for lead-based paint before renovating or redecorating

Written by

If you’re thinking of redecorating or renovating your home, before you pick out a new paint colour and start taking measurements, it’s crucial to test for the presence of lead-based paint. It is a great way to ensure your walls are safe before releasing potentially harmful dust and paint chips into your home. In fact, there are a number of substances you should consider testing for before making changes to your home.

What is it?

Until the early nineties, when it was banned from being sold in the United Kingdom due to the dangers is posed to people’s health, lead was a common component in paint. If you live in a home that was built before 1992, there’s a chance it contains lead-based paint – even if it’s hidden under layers of new paint!

Why do I need to test for it?

When left untouched, lead paint is generally unharmful. However, if it is disturbed during home improvements – from being cracked or drilled into, for example – it becomes hazardous. If paint chips are ingested, or lead dust is inhaled, there are a number of risks – especially for young children or pregnant women.

High exposure to lead dust can cause a number of problems that affect the body’s organs and function, including the neurological, gastrointestinal and reproductive organs. Symptoms can include headaches, insomnia and nausea, among others.

What should I do about it?

If you’re a landlord planning on renovating, or a homeowner thinking of doing some DIY, the first step is to test for the presence of lead in paint.

Our self-test kits are safe, easy to use, and come complete with instructions and return packaging. The results will be back to you within three working days.

Purchase your self-test kit here, or get in touch with a member of the Envirochem team today: on our live chat or via the form below;

 

Contact Envirochem now
Sending

Why you should purchase a self-test legionella kit.

Written by

Here at Enviorchem, we have recently launched a range of self-test kits to help keep you safe and make it easier for you to test for harmful substances in your home or workplace. Our wide range covers a multitude of various substances, including Legionella, and comes with all the necessary equipment and safety measures needed, so it’s super quick and easy to test for it yourself.

When it comes to the water we use everyday, it’s important to ensure that it’s safe enough to be used and consumed and to make sure it poses the least risk of immediate or long-term harm.

Legionella is a bacteria which, if left in favourable conditions, can cause Legionnaire’s disease. The bacteria can be found in areas like cooling towers, spa pools and showers, among other places. It can be hard to know when water isn’t quite right without organising proper testing. Our self-test kits allow you to take a sample of the water to send to us for testing.

In our kits you will find specialist water sample bottles, a sample submission form, and easy ­to-follow detailed instructions of how to take the sample yourself. They’re quick, safe and easy ­to-use.

If you’re concerned about water quality or the presence of legionella, you can order a self-test kit from the Envirochem website today. And, our expert team is always on hand if you need more information or would prefer for someone to attend a site to take samples for you.

Below are the links to purchase any of our self test kits or if you prefer to visit our website – https://envirochem.co.uk/shop/products

 

 

For more information or to get in touch with one of our team please fill out the form below or email us at office@envirochem.co.uk.

Contact Envirochem now
Sending